Mechanical Engineer - Electric Motor Design
Please send resume to: hr@pacmacltd.com
Test Technician
Please send resume to: hr@pacmacltd.com
Import & Export Clerk
Please send resume to: hr@pacmacltd.com
Test Engineer
Please send resume to: hr@pacmacltd.com
Manufacturing Process Engineer(focus on electric motor)
Please send resume to: hr@pacmacltd.com
MFG Senior Engineer
Please send resume to: hr@pacmacltd.com
Electric Design Engineer
Please send resume to: hr@pacmacltd.com
1. Design all aspects of permanent magnet AC motors and AC induction motors for automotive and industrial applications.
2. Use simulators and software tools to design/develop/model circuits and systems and document the designs.
3. Solve electric and magnetic circuit problems in time- and frequency- domains.
4. Analyze motor/drive interactions, motor insulation failures due to non-sinusoidal voltage waveforms, and motor losses.
5. Work with purchasing dept. and vendor companies to communicate technical requirements and ensure product quality.
6. Support sales with technical literature on product electrical systems.
1. Bachelor degree or above, Electrical Engineering with emphasis in electrical machines or equivalent work experience.
2. 3 to 5 years experience in design electrical machines, expertise in design, test and service of motor-drive systems.
3. Have comprehensive knowledge of electrical and magnetic materials, ability to plan complex projects and system development for multiple products, and ability to define specifications for multiple projects or product families.
4. Familiar with Office, 3D modeling & 2D drawings (SolidWorks), Motor design software (Opera, Speed, JMAG, etc).
5. Basic English preferred.
SQE
Please send resume to: hr@pacmacltd.com
1. Focus on supplier validation, auditing and problems resolution.
2. Perform pre assessment audit on new suppliers.
3. Perform process audit on new and existing suppliers and follow up with corrective actions implementation.
4. Monthly PPM analysis.
5. Monthly scrap and cost analysis.
6. Connection between quality/engineering/MFG/assembly.
7. Problem analysis and resolultion.
1. High school and above, Electrical or Mechanical engineering.
2. At least 3 years experience as SQE in Electric motor field.
3. Electric motors and/or electric motors component manufacturing and process knowledge, machining process knowledge, and familiar with quality 5 tools and PPAP.
4. Good communication skill in local language and English is preferred.
5. Good coordination /Good teamwork; Be able to work independently; Good problem –solving ability;
6. Be able to face challenges and work under pressure.
MFG Process Engineer
Please send resume to: hr@pacmacltd.com
1. Process Optimization: cycle, equipment usage, tools, fixtures, etc.
2. Develop new process or product.
3. Evaluation and application for raw materials.
4. Improve workshop layout.
5. Reduce the process cycle for new tools.
6. Program and produce new parts.
7. Record all process improvement of implemented.
8. Improve machining process to meet new design or adjustment.
9. Screen different technical process to improve productivity or quality.
10. Monitor machining process, and ensure creating new methods to reduce procedure.
11. Cooperate with suppliers, ensure meeting the quality standard.
12. Ensure meeting the productivity.
1. College degree or above, major in mechanical engineering or industrial.
2. More than 2 years experiences in mechanical process.
3. Strong sense of responsibility, good communication skill and familiar with the safety system.
Mechanical Design Engineer
Design and develop complete gearboxes for industrial applications. Please send resume to: hr@pacmacltd.com
1. Design and complete assembly and product drawings for manufacturing
2. Maintain Engineering Change Notice (ECN) and follow up of ECN implementation
3. Be responsible of prototype assembly and testing
4. Work with assembly to develop assembly instruction
1. B.S.or M.S in Mechanical Engineering; Preferred Solidworks experience and training
2. 3 to 5 years experience in mechanical power transmission design
3. Gearbox and/or industrial equipment design
4. Knowledge of material properties and their application
5. Familiarity with assembly and testing process
6. Familiarity with national and international design standards
7. Knowledge of Kisssoft and gear design
8. Able to make drawing by international geometric dimensioning & tolerancing
9. Good communication skill in local language and English
10. Provision in Solidworks or equivalent 3D design package
11. Good teamwork
12. Be able to work independently.
13. Good problem –solving ability
14. Be able to face challenges and work under pressure.
Assembly Process Engineer
Please send resume to: hr@pacmacltd.com
1. Responsible for assembly process. Support production line to do Process flow chart, FMEA, Control Plan.
2. Participate in new product transfer, responsible for new process, equipment, fixture design and qualification.
3. Process capability study and improvement.
4. Prepare PFMA and other relative documentations for production.
5. Time studying of process every day
6. Improve and updated routing in time
1. Bachelor or above, major in mechanical and electronic engineering
2. 3+years experience in mechanical assembly, Auto industry experience is plus.
3. Familiar with automation mechanical assembly line process and equipment.
4. Ability to design tooling and fixture, ability to do modification and qualification on new tools and equipment.
5. Good command on Chinese and English.
6. Strong sense of responsibility, good communication skill and familiar with safety regulations system
Domestic Sales Manager
Please send resume to: hr@pacmacltd.com
1. Negotiate prices and purchase agreements, manage sales related business, prepare sales forecasts for OEM (Original Equipment Manufacturers) within the PRC
2. Responsible for all communication and correspondence with customers/prospects
3. Responsible for helping develop the Corporate Strategic Product plan.
4. Identifies, pursues and develops new product opportunities with customers and sectors that may be non-traditional but fit within our core competencies
5. Lead generation and involvement in the RFP/Quotation process
6. Implements, disseminates and sustains account management reports, including but not limited to Account Plans, Account Profiling, Trip Reports and Monthly Major Opportunities Maps to management
7. Prepares and delivers sales presentations to key clients in coordination with Engineering Product Specialist
8. Analyzes and evaluates assigned customers and sectors regarding sales forecasting, trends and potential competition, economic and business conditions; advises and makes recommendations for more effective strategy implementation
9. Prepares and delivers periodic sales reports for assigned sectors showing sales volume, potential sales and areas of proposed client base expansion
10. Supports internal and external customers by monitoring and resolving issues, including but not limited to complaints regarding product quality, installation or performance
11. Collects and provides competitor intelligence to peers and management as directed and required
12. Coordinates sales orders, monitors production progress and shipping schedules as needed
13. Works effectively with internal departments, peers and management to leverage and utilize the full capabilities of Omni Gear® knowledge base to the benefit of customers and the Company
14. Continues to increase knowledge of Omni Gear® products, improve selling techniques and cultivate exceptional, professional relationships with peers, the management team, OEM accounts and product users
15. Recommends new product and literature needs, develops clear concise, accurate and attractive sales products and materials
16. Attends and participates in marketing communication meetings, Company sales meetings, trade shows and conventions, industry meetings and other related events
1. B.S. Degree in Engineering with emphasis in mechanical and/or electrical disciplines or equivalent work experience. B.S. Degree in Engineering with emphasis in mechanical and/or electrical disciplines or equivalent work experience.
2. 5 or more years of engineered product OEM sales.
3. Familiar with most Microsoft Office applications.
4. Excellent communication skills both written and verbal, Mandarin and English
5. Capable of a professional rapport working with customers and Omni Gear management team
6. Previous experience with off road equipment
Based in Shanghai, potential 50-60 % travel (travel within the PRC and internationally to trade fairs)
Trainee
Please send resume to: hr@pacmacltd.com
1. Training from the basic operation principle.
2. Familiar with the operation process of assembly and manufactory.
3. Make manufactory optimism proposals and make continuous improvement to manufactory, assembly and quality.
4. Become one member of the leadership team after serious training.
1. Technical secondary or above, Mechanical background, such as CNC majors.
2. Graduates preferred; Internship experience in related industry preferred
3. Can read mechanical processing figure, symbol and drawings.
4. Strong sense of responsibility, good communication skill and familiar with safety regulations system.
CNC Lathe Operator
Please send resume to: hr@pacmacltd.com
1. Observe all procedures, work instructions and safety norms, the completion of various production tasks assigned by superiors accurate strictly; finish all production tasks assigned by supervisor.
2. Production inspection in the processing
3. Daily maintenance for machine tool
4. Measuring tooling of checking and validation
5. 5S work of processing area
6. Other works arranged by leader
1. Serior high school and above, major in engineering or mechanical manufacturing category
2. CNC Lathe Certificate preferred
3. Can understand simple CNC lathes process.
4. Can use vernier caliper, micrometer diameter, inside diameter dial indicator, vernier depth gauge, only through regulation skillfully;Proficiency in CNC lathes.
5. Good command of communication skills; Strong sense of responsibility, good communication skill and familiar with safety regulations system
CNC Mill Operator
Please send resume to: hr@pacmacltd.com
1. Observe all procedures, work instructions and safety norms, the completion of various production tasks assigned by superiors accurate strictly;finish all production tasks assigned by supervisor.
2. Production inspection in the processing
3. Daily maintenance for machine tool
4. Measuring tooling of checking and validation
5. 5S work of processing area
6. Other works arranged by leader
1. Serior high school and above, major in engineering or mechanical manufacturing category
2. CNC Mill Certificate preferred
3. 2 years experience in operating CNC machining center;can manual programming
4. Can read mechanical processing figure, symbol and drawings;can understand simple processing center program
5. Solve the technological problems in the production process independently;have a strong ability to read mechanical drawings,read complex mechanical drawing independently;use the relevant jig and auxiliary machinery;use vernier calipers, outside micrometer, dial indicator, vernier depth gauge
6. Good command of communication skills; Strong sense of responsibility, good communication skill and familiar with safety regulations system